Specification of the machine:
① Mater station plate:1350mmх1250mmх30mm
② Deputy station plate:2600mmх400mmх30mm
③ The dimension of power distribution box:500mmх1200mmх1900mm
④ The dimension of machine:4500mmх2200mmх1600mm
⑤ Machine weight: 3500KG
⑥ Machine power: 12.5KW
⑦ Electric supply:380V, 50Hz, three-phases
Standard assembly line:
① The Fan shape cutting system on mother roll: 1 set
② The die punching system on the top of capsule: 1 set
③ Aluminum mold to make the capsule as per the design from Customer: 1 set
④ Hot stamping on the top of capsule: 1 set
⑤ Hot stamping on the skirt of capsule: 1 set
⑥ Photoelectric positioning system on mother roll: 1 set
⑦ Photoelectric tracking system on the color code of capsule’s top: 1 set
⑧ Photoelectric cut-to-length system on the color code of mother roll: 1 set
⑨ Tear band system: 1 set
⑩ Automatic-tandem system of finished product: 1 set
① PLC control system:from AELTA, Taiwan with touch-screen display.
② Air valve:from FESTO,Germany.
③ Air cylinder: from CAMOZZI, Italy.
④ Air heater: from LEISTER, Switzerland.
⑤ Feeding motor: from HDB, joint venture of China and Germany.
⑥ Photoelectric: from AUTONICS, Korea.
⑦ Intermittent segmentation: DEX14DT-12-120SRBW, Taiwan.
⑧ Color code sensor: YATAI, Shanghai.
⑨ Driving motor:China, 3KW.
⑩ Water-ring vacuum pump: China, 3KW.
11 Frequency conversion speed regulating system on main motor: China.
Above configuration can be regulated to meet customer’s need.
Technological process of production:
① Feeding mother roll
② Mother roll unwinding automatically
③ vibration-proof tension controlling on mother roll
④ Stamping on capsule’s skirt
⑤ Tracking color code
⑥ Glue spreading
⑦ Adding tear band
⑧ Cutting mother roll
⑨ Mold receive the mother roll sheet, rolling into tube
⑩ Glue line seaming(three times)
11 PVC thermoforming( or polyethylene aluminum capsule cold forming)
12 Pasting Aluminum foil or PVC on the top of Capsule
14 Stamping on top
15 Pneumatic die punching on top
16 Output finished product(counting and automatic-tandem)
① Top diameter: φ28mm~φ34mm
② Bottom diameter: Maximum 36mm
③ Height: 30mm~70mm
④ Taper: 1.5°~5°